Detailed Product Description

XJ250P workover rig is a newly developed workover and well flushing equipment.

The rig is fitted with 8*6 self-propelled chassis, engine and hydromechanical transmission.
Power is transferred to front & rear axles, drawworks, transfer case and
pump on deck. Power takeoff of transmission is connected with a hydraulic pump which provides power for some hydraulic parts on deck. The rig is equipped with a hydraulic rotary table, a power skid with a NTA885-C280 Cummins engine will provide power for the rotary table through a hydraulic pump.
It is also equipped with an air compressor and generator set providing power for
lighting of engine, drawworks, mast and operating platform.
* Well-known diesel engine and transmission.
* 69 ft ( 21m ) double mast or 59 ft ( 18m ) single mast.
* 6*6 full drive chassis, fast movement and good cross-country capability.
* Double drum drawworks,band brake, main drum with Lebus groove.
* Mast seat and simple operation platform shipped together with rig.
* Provide connecting port for rotary operation.
Main Parameters of XJ250P
Drilling depth (2-1/2"TBG) ft(m): 11812(3600)
Workover depth (2-7/8"DP) ft(m): 8530(2600)
Nominal hook load lb(kN): 112400(500)
Maximum hook load lb(kN): 168600(750)
Wireline diameter/effective line quantity in.(mm): φ0.87/6(φ22/6)
Maximum lifting speed ft/s(m/s): 4.92(1.5)
Overall dimensions in traveling condition ft(m): 45.28*9.81*12.80(13.8*2.99*3.9)
Weight lb(kg): 83775.56(38000)